·您的位置: 首页 » 资源教程 » 编程开发 » ASP » 在WAP网站上建立反馈表单

在WAP网站上建立反馈表单

类别: ASP教程  评论数:0 总得分:0
For any one person to create a web site and then think it is perfect, is ridiculous. It is important to
allow the visitors of our web sites to comment on what we have developed so that we can learn from the end-
user, our mistakes and not to mention the overall effectiveness. We create these facilities for web sites
so why not create them for our WAP sites.

A feedback form is developed by first creating the form, in this case to capture the end-user's comments,
and second to create the SendMail code, which will be used to send the comments via e-mail to us. As
always if you have any other problems with ASP/WML then you can e-mail me at michael_wright@lineone.net.
Also if you are a company supervisor, manager or director I am always looking for work, whether it be
working remotely or on-location. Please feel free to e-mail the same address.

First we create the feedback form itself. Please remember to change the red capital letters within the
code.

<% Response.ContentType = "text/vnd.wap.wml" %><?xml version="1.0"?>

<!DOCTYPE wml PUBLIC "-//WAPFORUM//DTD WML 1.1//EN" "http://www.wapforum.org/DTD/wml_1.1.xml">

<wml>

<!-- THIS IS THE FIRST CARD IN THE DECK -->

<card id="mainCard">

<p align="left"><small><b>Your Feedback</b></small></p>

<p align="left">Please enter your email address <input type="text" name="txtFrom" format="*M"/>

Please enter your feedback <input type="text" name="txtMessage" format="*M"/></p>

<do type="accept" label="Submit!"><go href="email.asp" method="post"><postfield name="txtFrom"
value="$txtFrom"/><postfield name="txtMessage" value="$txtMessage"/></go></do>

<p align="left"><small><a href="LOCATION OF YOUR MAIN WAP PAGE">Back</a></small></p>

</card>

</wml>

Now save that code as a file called feedback.asp. Then we must create the SendMail code. This SendMail
code can only be used if you have the ASPMail component installed on your web server. It is possible to
simply change the ASP code in conjunction with your own component e.g. CDONTS.

<% Response.ContentType = "text/vnd.wap.wml" %><?xml version="1.0"?>

<!DOCTYPE wml PUBLIC "-//WAPFORUM//DTD WML1.1//EN" "http://www.wapforum.org/DTD/wml_1.1.xml">

<wml>

<card id="mainCard" title="Send Feedback">

<p><small><b>Your Feedback</b></small></p>

<%

sstrToName = "YOUR NAME"

sstrToAddr = "YOUR EMAIL ADDRESS"

Set Mailer = CreateObject("SMTPsvg.Mailer")

Mailer.RemoteHost = "SMTP MAIL SERVER"

Mailer.FromAddress = Request.Form("txtFrom")

Mailer.AddRecipient sstrToName, sstrToaddr

Mailer.Subject = "SUBJECT OF FEEDBACK EMAIL"

Mailer.BodyText = Request.Form("txtMessage")

If Mailer.SendMail Then

Response.Write "<p><small>Mail has been sent...</small></p>"

else

Response.Write "<p><small>Mail send failure. Error was " & Mailer.Response &"</small></p>"

end if

%>

<p align="left"><small><a href="LOCATION OF YOUR MAIN WAP PAGE">Back to Menu</a></small></p>

</card>

</wml>

Now save that code as a file called email.asp and you are ready to test it. I hope you found this article
helpful. One of the main problems I had when creating this code was the way in which the WAP input is
recognised by the ASP code i.e. You must either use Request.Form("txtFrom") or Request.QueryString
("txtFrom") and not just Request("txtForm").


-= 资 源 教 程 =-
文 章 搜 索
关键词:
类型:
范围:
纯粹空间 softpure.com
Copyright © 2006-2008 暖阳制作 版权所有
QQ: 15242663 (拒绝闲聊)  Email: faisun@sina.com
 纯粹空间 - 韩国酷站|酷站欣赏|教程大全|资源下载|免费博客|美女壁纸|设计素材|技术论坛   Valid XHTML 1.0 Transitional
百度搜索 谷歌搜索 Alexa搜索 | 粤ICP备19116064号-1